Archive for October, 2014

Mold Growth: Symptoms of Mold Growth in a Home

Saturday, October 18th, 2014

Mold Growth: Symptoms of Mold Growth in a Home

Whenever there is a mold growth in any house, the inhabitants suffer from some common symptoms but they usually don’t realize these symptoms as of mold growth. They consider these symptoms to be of cold or flu. There are several different symptoms that show the presence of mold in homes. Here we would discuss some of the symptoms.

Types of Symptoms

Almost all molds are allergenic but some of them are toxic too. The symptoms that arise due to the mold presence can be categorized in 3 groups,

  • Allergic symptoms
  • Toxic symptoms
  • Infectious symptoms

Allergic Symptoms

Most of the molds are allergenic and they cause allergenic symptoms in humans. Whenever mold spores are inhaled, they cause problems. Immune system responds to these outside particles. The greater exposure to mold causes a person to become more sensitive to the mold allergies. The allergenic symptoms include,

  • Coughing
  • Sneezing
  • Nasal congestion
  • Sore throat
  • Itchy eyes and throat
  • Chest congestion
  • Blocked nose
  • Itchy nose
  • Headaches
  • Wheezing
  • Rashes on skin
  • Breath shortening
  • Red watery eyes
  • Baldness/hair loss
  • Hay fever signs
  • Itchy ears

Toxic Symptoms

The mold species that are poisonous and toxic for the human beings are 16 in number. These are toxicb because a heavy toxic chemical mycotoxin is released by these molds. The most common and popular toxic mold is stachybotrys chartarum commonly known as black mold. The symptoms caused by mycotoxins are toxic and more severe than the ordinary allergenic symptoms. These symptoms include,

  • Bleeding
  • Memory loss
  • Severe damage to internal organs
  • Cancer
  • Fatal diseases

Mold Infections

Mold infections are caused when the inhaled mold spores grow inside the humans. These infections grow in the digestive system, skin or sinuses. Mold infections occur in the weak and unhealthy people because of the weak immune systems So to avoid this problem call los angeles mold remediation. Usually they do not grow in the healthy people. The mold infections can be fatal and can cause death. The species that causes mold infections are,

  • Aspergillius fumigates
  • Trichoderma
  • Penicillium marneffi

 

Treatment of Mold Allergies and Infections

 

The best way is to avoid the exposure to the mold because prevention is always better than cure. The less you expose yourself to the mold; there are fewer chances of mold allergies and infections.
After this, you must get rid of the mold growth in your home. The removal of mold is the best treatment for avoiding the mold allergies and infections.

 

 

DIY repairing the water damaged Plaster Walls

Saturday, October 18th, 2014


DIY repairing the water damaged Plaster Walls

Whenever water damages your walls and ceilings, you must detect the source of water leakage and repair it first with the help of los angeles water damage restoration. After this you can start repairing the plaster walls but make sure that plaster is completely dried out. If the wall has 3 coat plasters then the water might damage the first surface layer or the whole 3 layers. This depends upon the amount of water leakage. The repairing of the walls that have been damaged only on the surface is done in one way and the walls whose 3 surfaces are damaged should be repaired in another way. Here we would discuss the surface damage and it’s repairing tips.

 

#1- Removal of the Damaged Plaster

The damaged materials (bubbling and peeling paint, degrading lath and crumbling plaster coats) must be removed immediately before starting the repairing process. The loose paint and other soft materials must also be scratched with help of a blade or knife.

#2- Removals of the Dust and Prime

Now the second step in repairing a water damaged plaster wall is the removals of dust and prime. This could be done with help of a stiff nylon brush. After this wash the wall and let it be completely dry. After this, apply an oil based good primer that will help to protect the surface of wall from the stains that bleed through the finished paint. This bleeding could cause bubbling in the new painted surface. Let the primer be dried completely. Oil based primer will take a little longer to dry as compared to the dry primers.

#3- Repairing of the Plaster

A joint compound must be filled in the damaged parts. This will help in leveling of the wall.

#4- Scraping and Sand

Now after leveling the wall with help of mud, sand paper must be used to remove the roughness and bumps. After this take a clean wet rag or sponge to wipe off the dust.

#5- Application of a Second Coat

After this, apply the second coat of mud on the damaged wall. The deepest parts must be filled in by heavy coats and lighter damages must be filled in by lighter coats. Again clean the dust from the surface after the drying of the mud.

#6- Final paint

After the drying of the last coat, dust must be wiped off with help of a moist rag. Finally apply the paint of your own choice.

 

Subscribe to RSS feed